DELIVERY: Sun Spring Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Sun Spring Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

The Sunspring Plug & Play Swimming Pool Heat Pumps are made especially above ground pools. These heat pumps, up to the 9kw, do not have to be hard-wired in, saving up to £500 on installation costs. As the 5, 8 & 12 Sun Spring Plug & Play Swimming Pool Heat Pump will plug into a 13 amp socket and does not require a by-pass, installation can be carried out in as little as 15 minutes by anyone. 

We have other ranges of Plug & Play Swimming Pool Heat Pumps available, which are less expensive than the Sunspring Heat Pump, but just as well made and all with 2 Year Warranties.

Poolstyle Mini 6 & 8 Plug & Play Above Ground Pool Heat Pump - Click Here

Flotide A10 9.6kw Plug & Play Swimming Pool Heat Pump - Click Here

To get the best from your Sunspring Heat Pump it is advisable to size the heat pump to the middle of its capabilities. To assist you in choosing the most suited Sunspring Heat Pump for your pool we have provided a guide of MAXIMUM POOL SIZES. If the volume of water in your pool is equal to or larger than the maximum volume it is always advisable to go for the next larger heat pump, as it will be easier to maintain your pool water temperature and potentially provide extended use outside the main 3 summer months.

Sunspring Heat Pumps Will Be Despatched Same Day If Ordered By 11 AM

For advice and help on choosing the Sunspring Heat Pump suitable for your pool please call us on 01322554870

Maximum Pool Size

Sunspring 5 Above Ground Pool Heat Pump  pools up to 12m3 - 15ft x 36" Metal Frame Pool

Sunspring 8 Above Ground Pool Heat Pump  pools up to 20m3 - 15ft x 48" Metal Frame Pool

Sunspring 12 Above Ground Pool Heat Pump  pools up to 30m3 - 18ft x 48" Metal Frame Pool

Minimum Flow rate required  

3m3/hr on Sunspring 5

4m3/hr on Sunspring 8

5m3/hr on Sunspring 12

Sunspring Heat Pumps come with graduated hose-tails to connect to 1.25" & 1.5" flexible hose. Also included are Glue Sockets for 50mm or 1.5" rigid pipe. In addition, no bypass kit is necessary.

The Sun Spring Heatpumps have a 2 Year Collect & Repair Or Replace Warranty. 

If you require help in sizing your heat pump or have any questions, please call us on 01322 55 4870

DELIVERY: Thermotec Mini Plug & Play Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Thermotec Mini Plug & Play Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur

PRODUCT INFO:

The Thermotec Mini 5 mini heat pump is designed specifically for above ground pools which will can give you extended season use so you can use it from April to October each year (providing it has properly been sized for your pool and you use a good quality Solar Cover).

The built in defrost function allows it to work in air temperatures as low as -7c ! (output of all heat pumps reduces drastically as the air temperature falls)

The Thermotec Mini is an easy to install portable Plug and Play Heat Pump, ideal for small above ground swimming pools.

Unlike other mini pool heat pumps, it includes a water flow switch and app control from your smartphone using Bluetooth

Reduce the cost of heating your pool using the Thermotec Mini heat pump rather than an electric heater.

Designed for small above ground pools up to 12m3 of water (pools with a solar cover)

Digital Heating Control Panel - Control Heating Up To 40°C

No ByPass Required if using small Intex pumps

DELIVERY: Mr Perfect Super Silent Heat Pump are sent out on a palletised 2 day service. This item may take slightly longer as it is shipped via specialist hauliers.

RETURNS: All products can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Available in March 2024 and for pre ordering now, we can offer the latest in swimming pool heat pump technology

Mr Perfect Super Silent Heat Pump are the Best Swimming Pool Heat Pump available in the UK ,offering the Latest technology with patented inver-pad paddle-fan for super quiet performance

The Mr Perfect Inverter Heat Pumps from Aquark are Built to the highest specification, we can offer up to 5 years parts and labour warranty. 12 years warranty on the compressor and heat exchanger.

Patented technology provides unrivaled performance with the air omitted from both sides of the heat pump rather from one side or from the top. 

Also supplied are 40mm rubber anti-vibration feet, drainage kit, canvas winter cover & 32AMP electrical quick-disconnect and Isolator switch.

If noise is an issue, then the Mr Perfect Inverter Heat Pumps from Aquark are the perfect choice. With an A Grade Energy Label, extremely quiet running.

As an example the 27kw version only produces 39 decibels @1m in inverter mode, this out performs the Garden Pac and Calorex model of similar size

Low Turbo Fan super quiet Mitsubishi compressor with 10-year warranty, incorporating patented inver-pad paddle-fan and with a built-in Soft Start, makes these swimming pool heat pumps the Top of the most quietest swimming pool heat pump list.

Now you can have both quiet running and all year heating in one very competitively priced heat pump, backed up by an industry leading warranty. Even if you do not need all year heating having the capability to run with an effective COP at low temperatures means the Mr Perfect Super Silent Heat Pump will allow you to heat an outdoor pool at the beginning and end of the season, normally the hardest times to keep the pool warm when using a heat pump.

5 sizes available from 22kw to 41kw. Massive 32kw is available in single phase

If you would like the Mr Perfect Inver-Pad Super Silent Swimming Pool Heat Pump with a longer and more comprehensive warranty then click the links below to view the offer pages.

Mr Perfect Inver-Pad Super Silent Swimming Pool Heat Pump + 5 Year On-Site Part & Labour Warranty

Mr Perfect Inver-Pad Super Silent Swimming Pool Heat Pump + 3 Year On-Site Parts & Labour Warranty

It is imperative to size your swimming pool heat pump correctly, so we ask that you please call is on 01322 554 870, to run through your requirements and get our best price at the same time.

DELIVERY: Mr Perfect InverPad Inverter Swimming Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Mr Perfect InverPad Inverter Swimming Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a returned Mr Perfect InverPad Inverter Swimming Pool Heat Pump is received back into our warehouse our returns department confirms that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Mr Perfect InverPad Inverter Swimming Pool Heat Pumps, with 3-Year On-Site Labour Warranty

In 2024 the UK's quietest heat pumps are the Mr Perfect InverPad Inverter Swimming Pool Heat Pumps. All models have WIFI built in, and Mr Perfect Inverter Heat Pumps are 20 times quieter than other heat pumps thanks to their nearly silent fan and compressor.

For this changing world, with rising energy costs, the Mr Perfect InverPad Inverter Swimming Pool Heat Pumps provide "All Year Round" heating by operating in temperatures as low as -15 degrees Celsius and heating water to 40 degrees Celsius whilst, at times, only using 7% of the electricity you would have used with an electric heater and 30% when compared to a standard On/Off heat pump.

With Mr Perfect InverPad Inverter Swimming Pool Heat Pumps, with 3-Year On-Site Labour Warranty and a 5 Year Parts Warranty, you can enjoy both quiet operation and all year-round heating with the knowledge you are covered in the unlikely event anything goes .

Even if you don't require year-round heating, having a swimming pool heat pump that can operate with an efficient COP at low temperatures means that the Mr Perfect InverPad Inverter Swimming Pool Heat Pumps will enable you to quickly and affordably heat an outdoor pool at the start and end of the season, which are typically the hardest times to keep the pool warm.

The Mr Perfect InverPad Inverter Swimming Pool Heat Pumps are the most up to date Swimming Pool Heating because they are loaded with the best quality components and innovative fan and evaporator design, that offers higher COP and increased effectiveness, while being even quieter than any other pool heat pump in the UK.

The Mr Perfect InverPad Inverter Swimming Pool Heat Pumps will be able to provide you with a 52 Week All-Year Round Swimming Season or just an Extended Season, depending on which size of Heat Pump you buy. So, if you require an Ultra Quiet, Super-Efficient heat pump for 12 month swimming use or only to extend the Summer season call us on 01322 554 870 to help you decide which Mr Perfect InverPad Inverter Swimming Pool Heat Pumps is best suited for your needs.

You may not require your pool heated in low temperatures but having a heat pump that will not freeze up or cut off at 10° or 5° degrees can be a huge benefit, as April and October mornings may be a lot cooler, even though you may not be using your pool you will still need to heat it to be able to use your pool in the afternoons when it is sunny and warm. 

If you require help sizing your Mr Perfect InverPad Inverter Swimming Pool Heat Pumps for your pool please call us on 01322 554 870

WHAT'S INCLUDED WITH MR PERFECT SWIMMING POOL HEAT PUMP

• 3 Year On-Site Labour Warranty With A 5-Year Parts Warranty
• Dark Grey Aluminium Casing with detachable grille(s) for evaporator cleaning.
• Built-in Wi-Fi (2.4g).
• 2m Prewired 6mm flexible electric cable.
• 32AMP IP61 Isolator Switch.
• 32AMP IP67 Waterproof quick disconnect for easy cleaning and winterising.
• 40mm Rubber Anti-Vibration Feet
• Drainage Kit.
• Canvas Winter Cover.
• Kerbside Pallet Delivery.

Mr Perfect Inverpad Inverter Heat Pump With Wi-Fi Brochure

DELIVERY: Mr Perfect InverPad Inverter Swimming Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Mr Perfect InverPad Inverter Swimming Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a returned Mr Perfect InverPad Inverter Swimming Pool Heat Pump is received back into our warehouse our returns department confirms that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Mr Perfect InverPad Inverter Swimming Pool Heat Pumps, with 5 Year On-Site Parts & Labour Labour Warranty,

In 2024 the UK's quietest heat pumps are the Mr Perfect InverPad Inverter Swimming Pool Heat Pumps. All models have WIFI built in, and Mr Perfect Inverter Heat Pumps are 20 times quieter than other heat pumps thanks to their nearly silent fan and compressor.

For this changing world, with rising energy costs, the Mr Perfect InverPad Inverter Swimming Pool Heat Pumps provide "All Year Round" heating by operating in temperatures as low as -15 degrees Celsius and heating water to 40 degrees Celsius whilst, at times, only using 7% of the electricity you would have used with an electric heater and 30% when compared to a standard On/Off heat pump.

With Mr Perfect InverPad Inverter Swimming Pool Heat Pumps, with 5-Year On-Site Labour Warranty and a 5 Year Parts Warranty, you can enjoy both quiet operation and all year-round heating with the knowledge you are covered in the unlikely event anything goes .

Even if you don't require year-round heating, having a swimming pool heat pump that can operate with an efficient COP at low temperatures means that the Mr Perfect InverPad Inverter Swimming Pool Heat Pumps will enable you to quickly and affordably heat an outdoor pool at the start and end of the season, which are typically the hardest times to keep the pool warm.

The Mr Perfect InverPad Inverter Swimming Pool Heat Pumps are the most up to date Swimming Pool Heating because they are loaded with the best quality components and innovative fan and evaporator design, that offers higher COP and increased effectiveness, while being even quieter than any other pool heat pump in the UK.

The Mr Perfect InverPad Inverter Swimming Pool Heat Pumps will be able to provide you with a 52 Week All-Year Round Swimming Season or just an Extended Season, depending on which size of Heat Pump you buy. So, if you require an Ultra Quiet, Super-Efficient heat pump for 12 month swimming use or only to extend the Summer season call us on 01322 554 870 to help you decide which Mr Perfect InverPad Inverter Swimming Pool Heat Pumps is best suited for your needs.

You may not require your pool heated in low temperatures but having a heat pump that will not freeze up or cut off at 10° or 5° degrees can be a huge benefit, as April and October mornings may be a lot cooler, even though you may not be using your pool you will still need to heat it to be able to use your pool in the afternoons when it is sunny and warm. 

If you require help sizing your Mr Perfect InverPad Inverter Swimming Pool Heat Pumps for your pool please call us on 01322 554 870

WHAT'S INCLUDED WITH MR PERFECT SWIMMING POOL HEAT PUMP

• 5 Year On-Site Parts & Labour Warranty
• Dark Grey Aluminium Casing with detachable grille(s) for evaporator cleaning.
• Built-in Wi-Fi (2.4g).
• 2m Prewired 6mm flexible electric cable.
• 32AMP IP61 Isolator Switch.
• 32AMP IP67 Waterproof quick disconnect for easy cleaning and winterising.
• 40mm Rubber Anti-Vibration Feet
• Drainage Kit.
• Canvas Winter Cover.
• Kerbside Pallet Delivery.

Mr Perfect Inverpad Inverter Heat Pump With Wi-Fi Brochure

DELIVERY: AG Mini Plug & Play Above Ground Pool Heat Pumps are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: AG Mini Plug & Play Above Ground Pool Heat Pumps can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirms that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur

PRODUCT INFO:

AG Mini Plug & Play Heat Pumps are ideal for above ground pools up to 18m3, such as an Intex or Bestway 12ft x 48" Metal Frame Pool.

It is suitable for heating a pool of 18m3 during the main Summer months. A Solar Cover has to be used whenever the pool is not in use, especially at night as this will speed up pool heating time and reduce heat loss at night by up to 5°C. Buy Now For Same Day Despatch.

The AG Mini Plug & Play Heat Pump requires 0.59kw of power to produce nearly 3kw of power out. That is roughly 8p an hour to get the equivalent of 40p of heat from the Poolex Nano Heat Pump into your pool making it so much cheaper to run than an electric pool heater.  You could even recoup the outlay in the first year in savings on your electricity bill.

The minimum flow rate from your pool pump is 2m3/hr to start the AG Mini Plug & Play Heat Pump For Above Ground Pools. Most Intex & Bestway pumps exceed this but check before buying

Digital Heating Control Panel - Control Heating Up To 30°C

No ByPass Required if using small Intex pumps

The AG Mini Heat Pumps are designed to heat Pool water slowly but very cost-effectively. It can raise your pool from cold to warm in 2 - 3 days, but from then on it is just a matter of keeping the heat level topped up every day. Depending on the weather you may need to run your heat pump from between 4 - 10 hours a day.

A Good Quality Solar Cover Must be Used With This Heat Pump to preserve as much heat as possible, especially at night.

The AG Mini Plug & Play Above Ground Pool Heat Pump is suitable for pools up to 12m3 

Below are suggestions for above ground pool sizes that the AG Mini Plug & Play Above Ground Pool Heat Pump is suitable for

DELIVERY: Flotide A10 Plug & Play Above Ground Pool Heat Pumps are sent out on a 2 working day service

RETURNS: Flotide A10 9.6kw Plug & Play Above Ground Pool Heat Pumps can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.

.

When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors..

PRODUCT INFO:

Flotide A10 Plug & Play 9.6kw Above Ground Pool Heat Pumps are designed for larger Intex & Bestway pools, up to 30,000 litres. This would equate to a 20ft x 12ft Bestway pool.

Flotide A10 Plug & Play Heat Pumps have an exceptionally high COP of 6, meaning you can get up to 6 times more heat into your pool than it will cost you in electricity.

Flotide A10 Plug & Play Heat Pumps will function down to an air temperature of 5°C, but as with any heat pump, the warmer the air the more efficient they are and the more heat transferred into your pool. The warmer the air the better!!

CALL US ON 01322 554 870 TO PURCHASE ANY ADDITIONAL HOSES YOU WILL NEED TO CONNECT TO YOUR POOL

When purchasing a heat pump large enough for your pool you would usually have to take into account the cost to be hard wired into mains by and electrician on its own spurs and RCD. The Flotide A10 Plug & Play Above Ground Pool Heat Pump is reasonably priced, user friendly and runs from a standard UK 13amp 3-pin plug. Everything you could want from a heat pump unit for an above ground swimming pool. 

Below is a guide that is is based on summer use with a good solar cover being used. 

Flotide A10 Plug & Play Above Ground Pool Heat Pump pools - Pools up to 30m3

Minimum Flow rate required 5.5m3/hr 

Supplied with 50mm sockets to connect to a bypass kit or hosetails. These can be purchased separately

We can also assist with the correct fittings you may need to install this heater. Fittings will depend on the make and model of your pool and how far away from the pool you want the heat pump situated. Please call us on 01322554870 for help and advise on heat pump installations

CALL US ON 01322 554 870 TO PURCHASE ANY ADDITIONAL HOSES YOU WILL NEED TO CONNECT TO YOUR POOL

PRODUCT INFO:

VBEX Full Inverter 10kW Horizontal Pool Heat Pump

State-of-the-art full-inverter heat pump for efficient, precise pool heating – the VBEX 10kW combines advanced Mitsubishi engineering with variable-speed inverter technology, allowing output from 25% to 100% to maintain your ideal pool temperature while minimising energy use.

Designed for medium pools ranging from 35,000 to 50,000 litres. Suitable for both in-ground and above-ground pools, and compatible with liner, concrete, or fiberglass installations. Built-in Wi-Fi lets you control temperature, schedule heating times, and monitor energy use from anywhere.

Features include whisper-quiet operation, A-rated energy efficiency, titanium heat exchanger for salt and chlorine compatibility, and a protective winter cover.

• VBEX 10kW Full Inverter – suitable for 35,000–50,000 litres (35–50 m²)
• Whisper-quiet operation with variable-speed inverter
• Smart WiFi Control – compatible with iOS & Android devices
• Full-inverter temperature control – output modulation from 25–100%
• Uses 30–40% less energy than fixed-speed heat pumps
• Premium Mitsubishi rotary compressor for durability
• Includes winter cover for off-season protection
• 3-Year Parts & Labour Warranty; 5-Year warranty on compressor & heat exchanger

Estimated Heating Times

Typical springtime heating durations using a solar cover, starting from 15°C ambient temperature (late April – early May):

Note: Actual heat-up times may vary depending on ambient temperature, wind, humidity, pool insulation, and use of a pool cover. Using a cover significantly improves heating efficiency.

F.A.Q: VBEX Full Inverter 10kW Pool Heat Pump

Q: How fast does the VBEX heat my pool?
A: Depending on pool size, starting temperature, and weather, heating typically takes between 1.5 and 3.5 days. Using a pool cover is essential.

Q: What pool sizes is it designed for?
A: Recommended for pools with surface areas 35–50 m² (35,000–50,000 litres). Optimal performance occurs in pools around 35–45 m².

Q: Can it be used in colder weather?
A: Yes. The VBEX Extended Season operates efficiently in temperatures from -5°C to +43°C, with best performance between 15–35°C.

Q: Does it use a standard plug?
A: Yes. This Plug & Play model comes with a 13A 3-Pin UK plug. Minimum recommended flow is 3–6 m³/hour.

Q: Is it compatible with salt-water pools?
A: Yes. The titanium heat exchanger ensures full compatibility with salt-chlorinated pools.

Q: How is it controlled?
A: Full Wi-Fi connectivity allows remote monitoring, temperature adjustment, scheduling, and energy tracking via iOS or Android devices.

PDF DOWNLOADS & VIDEOS:

• Technical Datasheet – full specifications and performance details
• Installation Manual – professional guidance for setup

DELIVERY: VBEX Full Inverter 10kW is usually dispatched within 1 working day. Delivery is via pallet or specialist courier due to size. We will contact you to schedule a delivery date once your order is placed.

RETURNS: Returns are accepted within 14 days of delivery, provided the unit is unused and in its original packaging. Refunds are issued after inspection and approval.

PRODUCT INFO:

VBEX Full Inverter 10kW Horizontal Swimming Pool Heat Pump

Advanced full-inverter heat pump delivering precise, efficient pool heating – the VBEX 10kW combines Mitsubishi engineering with cutting-edge inverter technology to provide variable output from 25% to 100%, ensuring your pool maintains the perfect temperature while keeping running costs low.

Ideal for medium to large pools with volumes from 35,000 to 50,000 litres. This heat pump is suitable for in-ground and above-ground pools, compatible with liner, concrete, and fiberglass installations. With built-in WiFi control, you can monitor and adjust your pool’s temperature remotely, schedule heating times, and track energy usage.

Key features include a whisper-quiet variable-speed compressor, A-rated energy efficiency, titanium heat exchanger for salt and chlorine compatibility, and winter cover for off-season protection.

• VBEX 10kW Full Inverter – suitable for pools 35,000–50,000 litres (35–50m²)
• Whisper-quiet operation with variable-speed inverter
• Smart WiFi Control – iOS & Android compatible
• Intelligent full-inverter temperature control – 25–100% output modulation
• 30-40% lower energy consumption vs fixed-speed heaters
• Premium Mitsubishi rotary compressor
• Comes with winter cover
• 3-Year Parts & Labour Warranty - Compressor & Heat Exchanger 5-Years Warranty
  

Estimated Heat-Up Times

Below are typical Spring start-up heating times, when using a solar cover, based on pool volume and target temperature, starting from 15°C ambient, which is common at the end of April and beginning of May:

Actual times will vary based on ambient air temperature, wind, humidity, insulation, and pool cover use. Using a pool cover is essential when heating the pool.

F.A.Q: VBEX Full Inverter 10kW Pool Heat Pump

Q: How quickly will the VBEX heat my pool?
A: Depending on pool volume, starting temperature, and weather conditions, heating can take from 1.5 to 3.5 days. Using a pool cover can reduce heat-up time by 30-40%.

Q: What size pool is this heat pump designed for?
A: Recommended for pools 35–50 m² surface area (35,000–50,000 litres). Optimal performance is achieved in pools 35–45 m² for fastest heating.

Q: Can it be used in cooler weather?
A: Yes, the VBEX operates efficiently in ambient temperatures from -5°C to +43°C. Performance is optimal between 15–35°C.

Q: Does it run off a standard plug?
A: Yes, this is a Plug & Play model, supplied with a 3-Pin 13amp Plug. Minimum flow rate needed is 3–6 m³/hour.

Q: Is it suitable for salt-water pools?
A: Yes – titanium heat exchanger ensures full compatibility with salt-water pools.

Q: How is it controlled?
A: Full Wi-Fi connectivity allows remote monitoring, temperature adjustment, scheduling, and energy tracking via iOS and Android apps.

PDF DOWNLOADS & VIDEOS:

• Technical Datasheet – complete specifications and performance data
• Installation Manual – professional guidelines for setup

DELIVERY: We aim to despatch VBEX Full Inverter 10kW within 3 working days. Due to size, delivery is via pallet or specialist courier. We will contact you to agree a delivery date once the order is placed.

RETURNS: The VBEX Full Inverter 10kW may be returned in its original packaging within 14 days of delivery if unused and resalable. Refunds are processed after inspection and approval.

PRODUCT INFO:

The Silverline Top 60 from Poolex is a 6.4kW (A26/W26) heat pump with Full Inverter technology, combining performance and comfort by quickly heating your pool while remaining quiet and energy-efficient. Silverline Top range is suitable for all year round usage (works down to -15°C).

Sort on space? The Silverline Top has vertical ventilation, meaning it fits well into restricted spaces, and as the air is expelled upward, noise is reduced while providing a discreet, modern integration into the pool environment.

Manage your Silverline Top remotely via built-in Wi-Fi which connects to your iPhone or Android smartphone using the Poolex app.

The Full Inverter technology of Poolex heat pumps offers a 30 to 35% reduction in energy consumption over the course of a year. This saving is made possible through the use of a variable frequency compressor and fan, which automatically adjust their speed based on your pool’s actual needs.

• Key features

  Ultra compact vertical ventilation, meaning it fits well into restricted spaces

  Warranty 3 years, Compressor 5 years (parts only after year 3) and Titanium coil (corrosion resistance) 10 years (parts only after year 3)

  Heating range from 15-40°C / cooling range from 10-30°C

  Works down to -15 degrees, suitable for all year round use

  R32 Refrigerant

  High quality GMCC compressors

  DC Inverter motor with infinitely variable speed

  DC inverter fan motor

  Twisted Tech Titanium heat exchanger, chlorine and salt resistant

  1½ inch female thread / 50mm glue union water connections

  Supplied with water connectors, winter cover, condensate hose and rubber isolating feet

F.A.Q: Poolex Silverline Top 60 Heat Pump

Q: How quickly will the Poolex Silverline Top 60 heat my pool?
A: Depending on pool volume, starting temperature, and weather conditions, heating can take from 1.5 to 3.5 days. Using a pool cover can reduce heat-up time by 30-40%.

Q: What size pool is this heat pump designed for?
A: Recommended for pools no more than 40m² surface area (40,000 litres). Optimal performance is achieved in pools 15-30 m² for fastest heating.

Q: Can it be used in cooler weather?
A: Yes, the Poolex Silverline will work down to lower temperatures but performance as with all heat pumps will reduce the colder the weather. ideal range - ambient temperatures from -15°C to +43°C. Performance is optimal between 15–35°C.

Q: Does it run off a standard plug?
A: No but is only requires a 6.8amp breaker and draws just 1.6kw meaning it is incredibly economical. This heat pump has a minimum flow rate needed of just 2 m³/hour.

Q: Is it suitable for salt-water pools?
A: Yes – titanium heat exchanger ensures full compatibility with salt-water pools.

Q: How is it controlled?
A: Full Wi-Fi connectivity allows remote monitoring, temperature adjustment, scheduling, and energy tracking via apps.

PDF DOWNLOADS & VIDEOS:

• Technical Datasheet – complete specifications and performance data
• Installation Manual – professional guidelines for setup

DELIVERY: We aim to despatch Poolex Silverline Top 60  within 2 working days. Due to size, delivery is via pallet or specialist courier. We will contact you to agree a delivery date once the order is placed.

RETURNS: The Poolex Silverline Top 60  may be returned in its original packaging within 14 days of delivery if unused and resalable. Refunds are processed after inspection and approval.

PRODUCT INFO:

Poolex Nano 3kw Heat Pump

• Key features

  Ultra compact design for small pools and limited spaces

  Quiet and economical

  Maximum COP of 5.4 (A26/W26)

  Automatic defrost

  Built-in Wi-Fi 2.4GHz (Requires Poolex App)

  Heating / Cooling / Automatic modes

  Suitable for 32mm/38mm hoses

  Heating range from 15-40°C

  Works down to -7°C, suitable for extended season use (determined by pool size)

  R32 Refrigerant

  High quality GMCC compressors

  Twisted Tech Titanium heat exchanger, chlorine and salt resistant

  Warranty (Return to Base): Heat Pump 2 years, Compressor 5 years and Titanium coil 15 years (against chemical corrosion, except for frost damage)

  Supplied with two hose connectors & clamps and 4 anti-vibration pads

F.A.Q: Poolex Nano 3.5 Ultra Heat Pump

Q: How quickly will the Poolex Nano heat my pool?
A: Depending on pool volume, starting temperature, and weather conditions, heating can take from 1.5 to 3.5 days. Using a pool cover can reduce heat-up time by 30-40%.

Q: What size pool is this heat pump designed for?
A: Recommended for pools no more than 20m² surface area (20,000 litres). Optimal performance is achieved in pools 10-15 m² for fastest heating.

Q: Can it be used in cooler weather?
A: Yes, the Poolex nano will work down to lower temperatures but performance as with all heat pumps will reduce the colder the weather. ideal range - ambient temperatures from -5°C to +43°C. Performance is optimal between 15–35°C.

Q: Does it run off a standard plug?
A: Yes, this is a Plug & Play model, supplied with a 3-Pin 13amp Plug. Minimum flow rate needed is 1.4–4 m³/hour.

Q: Is it suitable for salt-water pools?
A: Yes – titanium heat exchanger ensures full compatibility with salt-water pools.

Q: How is it controlled?
A: Full Wi-Fi connectivity allows remote monitoring, temperature adjustment, scheduling, and energy tracking via apps.

PDF DOWNLOADS & VIDEOS:

• Technical Datasheet – complete specifications and performance data
• Installation Manual – professional guidelines for setup

DELIVERY: We aim to despatch Poolex Nano within 2 working days. Due to size, delivery is via pallet or specialist courier. We will contact you to agree a delivery date once the order is placed.

RETURNS: The Poolex Nano may be returned in its original packaging within 14 days of delivery if unused and resalable. Refunds are processed after inspection and approval.

PRODUCT INFO:

Full Inverter Poolex Nano F1 5kw Plug & Play Heat Pump

• Key features

  Full Inverter Technology

  Ultra compact design for small pools and limited spaces

  Quiet and economical

  Maximum COP of 6 (A26/W26)

  Automatic defrost

  Built-in Wi-Fi 2.4GHz (Requires Poolex App)

  Heating / Cooling / Automatic modes

  Suitable for 32mm/38mm hoses

  Heating range from 15-40°C

  Works down to -7°C, suitable for extended season use (determined by pool size)

  R32 Refrigerant

  High quality GMCC compressors

  Twisted Tech Titanium heat exchanger, chlorine and salt resistant

  Warranty (Return to Base): Heat Pump 2 years, Compressor 5 years and Titanium coil 15 years (against chemical corrosion, except for frost damage)

  Supplied with two hose connectors & clamps and 4 anti-vibration pads

F.A.Q: Poolex Nano F1 5kw Ultra Heat Pump

Q: How quickly will the Poolex Nano F1 heat my pool?
A: Depending on pool volume, starting temperature, and weather conditions, heating can take from 1.5 to 3.5 days. Using a pool cover can reduce heat-up time by 30-40%.

Q: What size pool is this Inverter heat pump designed for?
A: Recommended for pools no more than 30m² surface area (30,000 litres). Optimal performance is achieved in pools 15-20 m² for fastest heating.

Q: Can it be used in cooler weather?
A: Yes, the Poolex nano will work down to lower temperatures but performance as with all heat pumps will reduce the colder the weather. ideal range - ambient temperatures from -5°C to +43°C. Performance is optimal between 15–35°C.

Q: Does it run off a standard plug?
A: Yes, this is a Plug & Play model, supplied with a 3-Pin 13amp Plug. Minimum flow rate needed is 1.4–4 m³/hour.

Q: Is it suitable for salt-water pools?
A: Yes – titanium heat exchanger ensures full compatibility with salt-water pools.

Q: How is it controlled?
A: Full Wi-Fi connectivity allows remote monitoring, temperature adjustment, scheduling, and energy tracking via apps.

PDF DOWNLOADS & VIDEOS:

DELIVERY: We aim to despatch Poolex Nano F1 within 2 working days. Due to size, delivery is via pallet or specialist courier. We will contact you to agree a delivery date once the order is placed.

RETURNS: The Poolex Nano F1 may be returned in its original packaging within 14 days of delivery if unused and resalable. Refunds are processed after inspection and approval.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

We offer three kits to allow you to connect your intex or Bestway Pool to a swimming pool heat pump that has a 1.5" BSP Female Thread connection for water in and out.

Intex or Bestway 2" Threaded Hose Connection Kit for Heat Pumps With 1.5" Female Threaded Connection

Content:

• 2 x Threaded Adaptors
• 1 x Intex Hose
• 1 x PTFE Tape

Intex 1.5" / 38mm Flexible Hose Connection Kit for Heat Pumps With 1.5" Female Threaded Connection

Content:

• 2 x Threaded Hosetails
• 1 x 3m 1.5" / 38mm Flexible Hose
• 1 x PTFE Tape
• 2 x Jubilee Clips

Intex 1.25" / 32mm Flexible Hose Connection Kit for Heat Pumps With 1.5" Female Threaded Connection

Content:

• 2 x Threaded Hosetails
• 1 x 3m 1.25" / 32mm Flexible Hose
• 1 x PTFE Tape
• 2 x Jubilee Clips

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Hydropro Bypass Kit for Heat Pumps that allows you to do a number of things that can improve the effectiveness of your heat pump, solar heating or other systems that requires a control the flow of water to you Heat Pump.

Using this bypass kit is also useful for winterising your Heat Pump without affecting the flow of water to your swimming pool

Content:

• 2 x PVC T-Piece 50mm 16bar
• 4 x PVC Tube 50mm 10cm 10bar
• 2 x PVC Tube 50mm 20cm 10bar
• 3 x PVC Ball valve 50 mm 16bar
• 4 x SS Hose clamp 32 x 44 mm
• 4 x ABS Hose tail white 50 x 32 mm / 38mm
• 1 x Tangit All pressure Glue 125g