pH Plus is used to increase the pH level of your swimming pool to bring the pH level between 7.2 & 7.6. This is to ensure the most effective use of the Chlorine in your swimming pool. When your pH reading is lower then the 7.2 it means your water is very acidic makes your water corrosive.
To adjust your pH pre disolve the pH in a clean bucket of water (remember to always add the chemicals to water) only using 100g per 10litres. Once fully disolved pour the water gently over the Swimming Pool or Hot tub return and ensure your circulation system is running. The next few days check your pH using either your digital or test strip readers to make sure you have the right balance.
Please ensure you do not add this chemical when your Swimming Pool or Hot Tub is in use. Also do not use your Swimming Pool or Hot Tub for 30 minutes after added this chemical.
Please check your pool size and volume of water before adding chemicals
- To increase your pH reading
- Keep the right balance to stop your water being acidic
- You will notice a pH change when the weather has been really hot or have had a lot of rain
Related Products
pH Minus (Sodium Bisulphate)
From only £3.59
Aquachek Chlorine Test Strips
From only £5.99
Aquachek Trutest Water Analyser
From only £49.95
Bestway Pool+ Aquatest Electronic Pool Water Tester
From only £19.95
Latest Blog Entries
Large parts of the UK are no longer in drought
The Sun online has just published the below article on the recent drought. With all the heavy rain l ...click here for more
Upgrade your pool equipment
With some warmer weather forcast it is an ideal time to look at upgrading your pool equipment, espec ...click here for more
Bio-Active – working with water restrictions
water restrictions mean that swimming pool owners need to look at the most effective ways to save wa ...click here for more
