Download PDF

Meaco DRY 300i Series Dehumidifier


Swimming Pool Dehumidifier Meaco Dry 300i range, are high quality swimming pool dehumidifiers that come in a variety of options including wall mounted, through the wall and Low Pressure Hot Water (LPHW) heating. This allows you to connect the dehumidifier to your boiler and the air can be heated via a hot water pipe that passes through the dehumidifier. Other Meco Dehumidifier options include a remote wireless humidistat.

Size Our Price

The Meaco 300i is small swimming pool dehumidifier that comes with various options. The Meaco 300i is made to exacting standards within the European Union with each unit individually tested before leaving the factory. Swimming pool dehumidifiers have to be robust because of the aggressive nature of the pool chemicals and the high humidity. Customers should note though that this range is only designed for heated areas above 15°C.

Dehumidifiers should dry the air and re-warm it to 2°C warmer than it came in. Other options are available, If you want the dehumidifier to heat the room air then it can by using an optional extra called LPHW (Low Pressure Hot Water). This enables you to connect the dehumidifier to your boiler so the air can be heated via a hot water pipe that passes through the dehumidifier. Other options include a remote wireless humidistat.

We offer advise on Dehumidifiers and an installation service if required. Selecting the right dehumidifier for your swimming pool is important and we can simplify this process for you, to do so we need to know the surface area of the water, the water temperature, the air temperature and whether you will be using a cover or not and details on the pool room. 

As a guide as long as the air temperature is 2°C warmer than the water temperature and you use a cover then the 300i can control a pool with a surface area of 43 square meters. All Swimming pools dehumidifiers comes with a 1 year manufacture warranty with the option to extend this up to 4 year if need be. You can also upgrade the 300i series to either a 300iM which has a metal casing or you can upgrade to the 300iS which is the Stainles Steel Casing.


Technical data

 Key Features

·         Wall, floor or through the wall mounting

·         Designed for swimming pools

·         Built-in humidistat

·         Rotary Compressor

·         Huge extraction rate

·         Low noise level

·         Optional wireless humidistat

·         Optional LPHW heating

·         Rotary compressor

·         Meaco branding

·         Optional Extended warranty


Extraction rate at 30°C and 80% rh

54 liters per day


Yes, mechanical with optional remote radio humidistat complete with display

Continuous Drainage Option




Electronic Controls

No, Optional electronic, wireless humidistat

Auto Start


Air Filter


Noise Level


Power Supply

Normal British 230V, 50Hz

Average Power Consumption


Total Heat delivered to the air


Normal running

4,4 amps, protection required 10 amps

Condensate Drain

16mm Diameter

Air Flow

440 Cubic Metres per Hour

Operating Temperatures





Continuous Drainage Only

Dimensions (HWD) mm

653 x 780 x 255mm



Optional Extras



Output 2kW (90/70°C – Water Temp in/Out)

Total Heat Output LPHW & dehumidifier Combined


Wireless Humidistat


Through Wall Mounting

On the 300iTTW Version

Floor Mounting Stand


Write a Review

Write a Review

Shopping Cart

Your shopping cart is empty.

Free Call Back

Latest Blog Entries

Certikin 91,000 BTU Gas Heater

We have on offer a Certikin Natural Gas 91,000 BTU Pool Heater. This heater has been used for just o here for more

Upgrade your Intex Pump and Filter

sand filter pump combo We have a 12" sand filter with a .33 pump, perfect for Intex Easy Set here for more

Geobubble Midas 600 Solar Covers

Special offer on 600 micron solar covers - This is for the Geobubble 600 micron Blue and Gold cover. here for more

©2004-2014 World of Pools - All Rights Reserved. - swimming pool supply