DELIVERY: Spectrum Hybrid UV Systems are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Spectrum UV Systems can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Elecro's Spectrum Hybrid is the next generation of UV water treatment. Providing a safe environment in clear water, the Spectrum Hybrid kills micro-organisms such as bacteria, viruses, chloramines and pathogens found in water, costing no more than a common light bulb to run. The next step in UV treatment, the unit creates Hydroxyl Radicals, which are essentially a water molecule with a Hydrogen atom removed, causing the molecule to be highly volatile and reactive. The exceptional mobility of the molecules that fill the reaction chamber leads to the destruction of pollutants in their path. Once the Hydroxyl  Radical has reacted with the pollutant it converts back into water.

Built to be installed easily into your existing set-up, all Spectrum Hybrid units are supplied complete with flow switch and the choice of either a lamp life indictor (which flashes ‘Red’ when the UV lamps are required to be changed after 9,000 hours) and reset switch; or a digital lamp life countdown and intelligent peristaltic dosing pump.

• Activated titanium reaction chamber produces Hydroxyl Radical oxidisers, and increases the sterilising effiency by up to 45% compared to traditional UV’s
• Two Power Options:
  • 55 Watts for flow rates up to 12m³/hour (50m³ pool volume)
  • 110 Watts for flow rates up to 24m³/hour (100m³ pool volume)
• Destroys micro-organisms such as bacteria, viruses, chloramines and pathogens, and provides a safe swimming environment in clear water
• Costs no more to run than a common light bulb
• Salt and sea water compatible
• Reduces chemical requirement
• 3-year warranty
• All Spectrum Hybrid units are supplied complete with flow switch and the choice of:
  a) 9,000 hour lamp life indicator and reset switch or
  b) Digital lamp life countdown and Intelligent dosing pump

DELIVERY: Elecro UV Systems are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Elecro UV System Systems can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Quantum UV Swimming Pool Sanitiser

Brand new technology to the swimming pool industry with the benefit of being used and approved by high profile industries such as hospitals and drinking water purification companies.

Quantum uses new Nano Crystal technology: a prime focus of the science world today; possessing the power to sterilise sewerage into drinking water without the use of chemicals. In fact one of the many benefits of the Quantum is a significant reduction of residual chemicals such as chlorine or hydrogen peroxide.

Built to be installed easily into your existing set-up, the Quantum is completely safe and significantly more powerful than chlorine, hydrogen peroxide, UV or ozone. Photocatalytic Oxidisation has an immensely powerful effect with the ability to instantaneously destroy viruses, bacteria and pathogens, and more astoundingly possessing the ability to convert sun tan oil, urea and other contaminants back in to their harmless molecular form.

Meticulously designed, Elecro have developed the first cost-effective, photocatalytic oxidiser specifically for the swimming pool industry, for a toxic free swimming sensation. Not only does it eliminate undesirable side-effects such as sore eyes, itchy dry skin, discoloured hair and strong odours, but it also makes water crystal clear, and most importantly it creates no risk to the lungs or health of bathers and swimming pool attendants.

All Quantum units are supplied complete with flow switch and the choice of either a lamp life indictor (which flashes ‘Red’ when the UV lamps are required to be changed after 14,000 hours) and reset switch; or a digital lamp life countdown and intelligent peristaltic dosing pump.

 

Information and Beneifts of Quantum UV System

• Combined Photocatalytic & Hydroxyl Radical technology: most powerful, proven oxidiser
• Only treatment that instantly destroys all bacteria, micro-organisms, pathogens and viruses found in water that even chlorine and other treatments cannot touch, including Naegleria Fowleri and Adenovirus
• Two power options:
• 64  Watts for flow rates up to 14m³/hour (65m³ pool volume)
• 110 Watts for flow rates up to 28m³/hour (130m³ pool volume)
• Ensures a significant reduction in chemical consumption
• Reaction is contained within the chamber releasing only pure, fresh water
• Comes pre-assembled with all necessary sensors and control components
• Ultimate sterilisation without compromise to health; eliminates sore eyes, itchy skin, discoloured hair, strong odours whilst creating no risk to the health of pool users
• Sea water compatible
• 14,000-hour lamp life
• All Quantum units are supplied complete with flow switch and the choice of:
  a) Lamp life indicator and reset switch or
  b) Digital lamp life countdown and intelligent peristaltic dosing pump

 

DELIVERY: Elecro UV Systems are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases..

RETURNS: Elecro UV Systems can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur..

PRODUCT INFO:

The Quantum UV Swimming Pool sanitiser is a brand new technology to the swimming pool industry with the benefit of being used and approved by high profile industries such as hospitals and drinking water purification companies.

Quantum uses new Nano Crystal technology: a prime focus of the science world today; possessing the power to sterilise sewerage into drinking water without the use of chemicals. In fact one of the many benefits of the Quantum is a significant reduction of residual chemicals such as chlorine or hydrogen peroxide.

Best UV System for Swimming Pools

Built to be installed easily into your existing set-up, the Quantum is completely safe and significantly more powerful than chlorine, hydrogen peroxide, UV or ozone. Photocatalytic Oxidisation has an immensely powerful effect with the ability to instantaneously destroy viruses, bacteria and pathogens, and more astoundingly possessing the ability to convert sun tan oil, urea and other contaminants back in to their harmless molecular form.

Meticulously designed, Elecro have developed the first cost-effective, photocatalytic oxidiser specifically for the swimming pool industry, for a toxic free swimming sensation. Not only does it eliminate undesirable side-effects such as sore eyes, itchy dry skin, discoloured hair and strong odours, but it also makes water crystal clear, and most importantly it creates no risk to the lungs or health of bathers and swimming pool attendants.

All Quantum units are supplied complete with flow switch and the choice of either a lamp life indictor (which flashes ‘Red’ when the UV lamps are required to be changed after 14,000 hours) and reset switch; or a digital lamp life countdown and intelligent peristaltic dosing pump.

 

• Combined Photocatalytic & Hydroxyl Radical technology: most powerful, proven oxidiser
• Only treatment that instantly destroys all bacteria, micro-organisms, pathogens and viruses found in water that even chlorine and other treatments cannot touch, including Naegleria Fowleri and Adenovirus
• 55  Watts for flow rates up to 14m³/hour (65m³ pool volume)

• Ensures a significant reduction in chemical consumption
• Reaction is contained within the chamber releasing only pure, fresh water
• Comes pre-assembled with all necessary sensors and control components
• Ultimate sterilisation without compromise to health; eliminates sore eyes, itchy skin, discoloured hair, strong odours whilst creating no risk to the health of pool users
• Sea water compatible
• 14,000-hour lamp life
• All Quantum units are supplied complete with flow switch and the choice of:
  a) Lamp life indicator and reset switch or
  b) Digital lamp life countdown and intelligent peristaltic dosing pump

 

DELIVERY: Blue Lagoon Systems are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Blue Lagoon Systems can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

The Blue Lagoon UV-C Salt Water is designed for salt and seawater pools (salt electrolysis). Thanks to the white PVC housing the salt has no corrosive influence. The device has a built-in high-frequency transformer. This transformer reduces current fluctuations and thus protects the lamp.

With the Blue Lagoon UV-C Salt Water you can disinfect water in an efficient and safe way for improved water quality. The UV-C output is at least 80 % after 9000 hours of operation. Thanks to the mount on the bottom, the lamp can be flexibly mounted and swivelled to 360°. This is ideal for e.g. installations in the corner or for combination with multiple lamps.Using this UV system for salt pools reduces theamount of salt required

 

 

 

DELIVERY: Blue Lagoon UV System are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Blue Lagoon UV Systems can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.


When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Blue Lagoon Ultra Violet system with a built in timer will provide fresh clean sparkling water in an enviromentaly and frendliy manner. good for your skin and eyes while saving you money and giving you far better quality pool water.

The Blue Lagoon UV-C Tech Timer has a wavelength of 253.7 nm is generated by the special lamp, which thus produces a bactericidal action. The Blue Lagoon UV-C Tech provides clean, fresh and clear water in an efficient and environmentally friendly manner.

The Blue lageen UV-c Timer has a built in high frequency ballast. This ballast absorbes current fluctuations and so protects the lamp. The devise also has an ingergrated hour counter that accuratley monitors rthe number of burning hours so you can see whenthe lamp needs replacing.

The Blue Lageen UV system neutralises bacteria, viruses and other primitive organisms and prevents them from reproducing. In addition, the stainless-steel interior reflects the UV-C radiation, thereby increasing the efficiency by up to 35%. With the Blue Lagoon UV-C Tech your water will be efficiently and safely disinfected, providing you with excellent water quality. The Blue Lagoon UV-C Tech also has a special T5 UV-C lamp with a unique lamp base

Technical specifications		40.000 L	75.000 L
Lamp UV-C Timer		40 Watt	75 Watt
UV-C (W)		15 Watt	25 Watt
		85%	80%
Pool capacity (L.)		40.000 L	75.000 L
Max. flow		20.000 l/h	25.000 l/h
Max. pressure		3 bar	3 bar
Connection		Ø63mm	Ø63mm
Length device		100cm	100cm

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Kleen Pool is a summer / winter Copper Sulphate based algaecide treatment. 1 litre of Kleen Pool Longlife will treat a swimming pool 28,200 litres or 6,200 gallons and will help keep your pool free from algae over the winter period. This product can be used in conjunction with most swimming pool sanitisers.

Prior to applying the Kleen Pool algicide you should increase the chlorine level to 6ppm and adjust the pH to between 7.2 and 7.6. If the winter is mild, further treatment may be necessary. Full instructions are provided

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Winterize your swimming pool using Relax Cleaner Winter (Concentrate). This is winter solution containing Algicide, and Stain & Scale Inhibitor which also has the ability to clarify pool water. The relax concentrate winter cleaner is designed to keep your pool free from algae over the winter period. This product can be used in conjunction with most swimming pool sanitisers.

Direction for use - Prior to applying the Relax concentrate cleaner winter you should increase the chlorine level to 6ppm and adjust the pH to 7.6. If the winter is mild, further treatment may be necessary

Fast next working day delivery on this pool chemical winterizing product

DELIVERY: Fi-Clor Chlorine & Bromine Reducer will be sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: Fi-Clor Chlorine & Bromine Reducer can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:  Fi-Clor Chlorine & Bromine Reducer will  lower the chlorine or bromine level in a swimming pool or hot tub if accidentally over-dosed. Available in 2.5kg tubs.

Dosing info: Calculate the volume of your swimming pool or hot tub, if in doubt use this link to our Swimming Pool Chemical Handbook to use the handy swimming pool volume calculator. Take an accurate reading of the free chlorine level or available bromine to discover the amount of sanitiser that needs to be removed from the pool or hot tub.

To reduce CHLORINE level, the dosing rate is 7gms of Fi-Clor Chlorine / Bromine Reducer per 1m³ (1,000 litres / 220 gallons) of water for every 1mg/l (ppm) of chlorine to be reduced. For the fair sized swimming pool of 50m³ (50,000 litres / 11,000 gallons), 350gof the product will reduce the chlorine level by 1mg/l (ppm)

To reduce the BROMINE level, the dose rate is 3gms of Fi-Clor Chlorine / Bromine Reducer per 1m³ (1,000 litres / 220 gallons) of water for every 1mg/l (ppm) of bromine to be reduced. For an average sized hot tub of 1.5m³ (1,500 litres / 330 gallons), 4.5g of the product will reduce the bromine level by 1mg/l (ppm).

To achieve the best results, it is advised to  distribute the product evenly around the pool or hot tub. Leave at least 2 hours before re-testing and making any further changes to the water if required.

It is very important to under-dose rather than over-dose, as too much Fi-Clor Chlorine & Bromine Reducer can produce a chlorine / bromine demand that may cause overdosing again. 

Fi-Clor Swimming Pool Chemical Advice Handbook

DELIVERY: Fi-Clor Hygiene Effervescent Paddling Pool Tablets Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases

RETURNS: Fi-Clor Hygiene Effervescent Paddling Pool Tablets can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Fi-Clor Hygiene Effervescent Paddling Pool Tablets are ideal for paddling pools without a pump & filter

It is good practise to shock the pool at the start of the swimming season using Fi- Clor Superfast Shock

Fi Clor Hygiene Effervescent Tablets For Use In Paddling Pools

Fi-Clor Hygiene Tablets are to be used to sanitise and protect  bathers in "fill and empty" paddling pools. One Effervescent tablet is sufficient to treat 300 litres (66 gallons) of paddling pool water. Dissolve the Fi-Clor Hygiene Effervescent tablets in a clean plastic bucket of water then pour this into the paddling pool.

Paddling Pools should be emptied and refilled every few days.

DELIVERY: Fi-Clor Premium 5 Mini tablets are sent out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: Fi-Clor premium 5 tabs can be returned if unopened and in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Fi-Clor Premium 5 offers 5 actions in one treatment. 1kg of 20g Chlorine tablets that are specifically designed to offer longer lasting disinfection, that combats algae and acts as a clarifier.

Premium 5 tablets are the most effective way of raising the pool water Free Chlorine level, longer lasting action to kill bacteria, fast acting chlorine without effecting pH and reduces Chlorine loss to sunlight and acts as a clarifier

To calculate your swimming pool volume use this link to our Swimming Pool Chemical Handbook to use the handy swimming pool volume calculator

Dose rate: 13 x 20g Tablets Per 50m3 (50,000 litres / 11,000 UK Gallons) per week.

DELIVERY: Aquacheck Yellow Test Strips normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Aquachek Yellow Test Strips can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur. 

PRODUCT INFO:  Aquacheck Yellow Swimming Pool and Spa test strips provide fast accurate results for your pool or spa. 

The Aquachek Yellow test strips test for Free Chlorine, pH, Total Alkalinity and Stabiliser

You get 50 strips in each bottle. As a guide you should check the water balance and chlorine levels in your pool or spa a minimum of twice a week and more often if the swimming pool or spa is being used frequently. FYI - On average, 2 bottles will last a pool season

We hold test strips in stock for fast next working day delivery.

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Relax 5kg Stabilised Chlorine Granules (Sodium Dichloroiscyanurate-Dihydrate) are the most simple and effective choice for your swimming pool. Being virtually pH neutral it is possible to dose your swimming pool with Chlorine throughout the summer without affecting the swimming pool water pH by any noticeable degree. If you have an indoor pool, we would suggest using Un-stabilised Chlorine, commonly called Shock.

The ideal chlorine reading in your pool water is between 1 and 3 ppm, this figure can easily tested using Aquachek Test Strips. Testing your pool water daily will allow you to keep control of the swimming pool chlorine level very easily. If the reading is too low, you will simply need to add more Chlorine Granules to the pool water. Full instructions, measurements and quantities are provided on each tub.

Little and often is the most effective method of dosing your swimming pool with Chlorine, as it is a lot easier to correct under dosing than it is over dosing.

The impact of pH on efficiency of Chlorine in your Swimming Pool

Your Swimming Pool pH value has a direct impact on the ability of the Chlorine to sanitise swimming pool water efficiently. A high pH level generally means Chlorine Granules are less efficient.
Water pH of 6.5 - Chlorine in your pool is around 90% efficient
Water pH of 7.0 - Chlorine in your pool is around 75% efficient.
Water pH of 7.5 - Chlorine in your pool is around 47% efficient
Water pH of 8.0 - Chlorine in your pool is around 22% efficient.

 

DELIVERY: .

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Jolly Gel is one of the most popular Pool products on the market, easy to use, the Jolly Gel cube is placed in the Pool Pump Skimmer basket to remove phosphates and improve water clarity. Just one cube can treat 12,500 gallons for 2 to 3 weeks

Jolly Gel is the UK's most popular flocculant, improving your pool water clarity and removing phosphates. The gel ckubes work by placing a clear film over the filter media, this prevents the smallest particals from passing straight through the filter media. Trapping the small particals turns the clarity of the water to crystal clear within a few hours. 

Each pack contains 4 jolly Gel Cubes, enough to last at least 8 weeks on a 12,500 pool.

Jolly Gel cubes are held in stock for fast delivery

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The Rainbow offline 300C chlorine/bromine feeder can save time, provides peace of mind that chemicals are being added and reduce manual handling of chemicals. The feeder usees large or small chlorine or Bromine slow dissolving tablets to make sanitizing your new or existing pool or spa easy and automatic.

• Reduces manual handling of chemicals
• New or retro-fit
• External control valve to adjust the feed rate
• No special venting required
• Holds approx 11 x 200g tablets or 98 x 20g tablets
• Can treat pools between 25³ and 180m³

 

 

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Rainbow In-Line 320C Chlorine Feeder

Rainbow In-line chlorine and bromine feeders are ideal for swimming pool owners that don't want to dose there pool each week, just fill the dispenser with tablets and let it do the work for you. The Rainbow 320 will treat pools between 20m3 and 180m3. Easy to install inline design.

 

Rainbow in-line chemical feeder is an easier way to manage putting either chlorine or bromine into your swimming pool. Using a feeder will reduce the amount of manual dosing which is ideal if want to ensure chloring is passing through all the time.

• Reduces manual handling of chemicals
• New or reto fit
• External control valve to adjust the feed rate
• No special venting required
• Holds approx 11 x 200g tablets or 98 x 20g tablets
• In-line feeder can treat pools between 20m3 and 180m3

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Clearwater Swimming Pool chemical feeder for most style swimming pools. More effectice way to add chemicals to your pool water. easy install and quicker to use than traditional method. Suitable for chlorine or bromine pools.

A plastic Non-Return Valve must be installed immediately before any chlorine dispensing unit

 

 

 

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

DPD is an abbreviation of diethyl-p-phenylene diamine. DPD tablets react with pool water containing chlorine or bromine, colouring the water sample various shades of red. The deeper the colour the higher the concentration of sanitiser.

DPD No 1 tablets by Relax are to be used with a swimming pool water testing kit

DELIVERY: Bromine test Kit - Delivery will normally take between 1-3 days

RETURNS: Bromine Test Kits can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Bromine test kit will test your hot tub spa water for the correct level of Bromine and the correct level of pH in your Pool or Spa Water

 

 

 

 

PRODUCT INFO:
Aquachek BromineTest Strips test for not only Free Bromine but also Total Hardness, pH and Total Alkalinity.
Immerse the AquaChek test strip into the hot tub or pool water then remove it immediately. After 15 seconds the reading showing are the levels of your hot tub or pool.
Ensure that you test your spa before each use and your pool at least once a week. When checking your pool test twice, from two points furthest apart. Keeping a log will assist you in understanding how your water reacts to bather loads and weather.
Each bottle has full instructions.

Testing Capabilities
pH - range of 6.2 - 8.4. Hot tub & pool water should be between 7.2 - 7.6
Free Bromine- range of 0 - 10. Hot Tub water needs to be kept between 3ppm - 5ppm & pool water between 1ppm - 3ppm
Total Alkalinity - range of 0 - 240 ppm. Hot Tub & Pool water should be between 80 - 120. 
Total Hardness - Monitor hardness levels to protect against corrosion, scale formation, cloudy water or excess foam. 

Aquachek BromineTest Strip Application Instructions
1. Dip strip into pool or hot tub water and remove immediately.
2. Hold strip level for 15 seconds, but do not shake the excess water from strip.
3. Compare Free Chlorine, pH, Total Alkalinity and total Hardness results to the colour chart on the back of the bottle.
4. Adjust water levels accordingly using appropriate chemicals.
5. Store at room temperature and remember to ensure the cap is put back on tight.

DELIVERY: Delivery for Scube 11 will normally take between 1-3 days

RETURNS: Scuba 11 can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

The Lovibond Scuba 2 Digital tester uses standard Lovibond photometer reagents.

Test Chlorine 0-6ppm, pH 6.5-8.4, TA 0-500ppm, Cyanuric 0-160ppm.

Swimming pool owners can now benefit from Lovibond technology used in public pools but at an affordable price. The Scuba II is a small, compact, easy-to-use digital water tester for the 5 most important tests: Free Chlorine, Total Chlorine, pH, Alkalinity and Cyanuric Acid.  This buoyant, watertight instrument is ideal for quick home testing (results displayed in a large viewing area within 1 minute). Supplied with sufficient tablets for a normal season’s testing, it is the ideal solution for domestic users looking for accurate, digital results.

DELIVERY: Trutest Strips - Delivery will normally take between 1-3 days

RETURNS: Trutest Strips can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.



When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur..

PRODUCT INFO:

Aquachek Trutest Refill Test Strips - 50 strips in a bottle - We offer Fast next day delivery - Lowest price and quick delivery on the Aquachek Refill test strips. The TruTest strip reader from Aquachek is one of the most accurate ways to test your swimming pool or spa water. 

 

 

 

DELIVERY: Winter Closing Kit will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Winter Closing Kit can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

 

 

PRODUCT INFO:

Winter Pool Chemical Kits will provide you with the essential water treatment products to keep your swimming pool clean throughout the winter months. Winterise you pool correctly will help avoid costly repair bills and leave you with a clean pool to start the new season. Our Relax and Champion Brand Winter Swimming Pool Chemicals have been packaged to suit all styles of swimming pool.

Should you shock pool before closing?

Quick answer is Yes. It is important to balance the pH and shock the pool prior to adding winter algicides. Make sure you shock the pool one day prior to adding the winter algicide

Swimming Pool Winter Closing Kits for Closing Small, Medium and Large Pools

When closing your swimming pool for winter it is vital you protect the swimming pool as much as you can, large scale units such as heat pumps and pumps have their own manufactures guidelines you should followed for winterising. But keeping the water intact and protecting your pool liner from staining is the same across the board. The pool should be shock treated first with a powerful oxidizing agent that helps burn off any remaining impurities and leaves your pool clean and clear before you add the Winter algaecide. 

Relax and Champion Granular Shock – An easy method for shock dosing your swimming pool water. An effective way to deal with water problems and restore clear sparkling water. To ensure safe to use of your pool, maintain a free level between 1-3 ppm and a pH level of between 7.2 and 7.6

Small - Closing Pools For Winter up to 35 cubic metres - Max Pool Size 24ft x 12ft - 1kg Relax Power Shock Granules & 2 x 1 Litre Relax Concentrated Winterlong Copper Algicide

Medium - Closing Pools For Winter up to 50 cubic metres - Max Pool Size 28ft x 14ft - 2kg Relax Power Shock Granules & 3 x 1 Litre Relax Concentrated Winterlong Copper Algicide

Large - Closing Pools For Winter up to 100 cubic metres - Max Pool Size 40ft x 20ft  - 5kg Champion Power Shock Granules & 6 x 1 Litres Relax Concentrated Winterlong Copper Algicide

Please Call or email us if you need help or advice on closing your pool for the winter

 

PRODUCT INFO:

Aquachek Chlorine Test Strips are the best and most accurate dip test strip for swimming pools & Hot Tubs

Aquachek dip test for not only Free Chlorine but also Cyanuric Acid, pH and Total Alkalinity.

The Best Dip Test Strip For Intex Pools Is Aquachek Chlorine Test Stips

Immerse the AquaChek test strip into the hot tub or pool water then remove it immediately. After 15 seconds the reading showing are the levels of your hot tub or pool.

Aquacheck Are The Best Dip Test Strip For Hot Tubs 

Ensure that you test your spa before each use and your pool at least once a week. When checking your pool test twice, from two points furthest apart. Keeping a log will assist you in understanding how your water reacts to bather loads and weather.
Each bottle has full instructions.

Testing Capabilities
pH - range of 6.2 - 8.4. Hot tub & pool water should be between 7.2 - 7.6
Free Chlorine - range of 0 - 10. Hot Tub water needs to be kept between 3ppm - 5ppm & pool water between 1ppm - 3ppm
Total Alkalinity - range of 0 - 240 ppm. Hot Tub & Pool water should be between 80 - 120. 
Cyanuric Acid - range of 0 - 300 ppm. Cyanuric Acid, also called stabiliser or conditioner, helps reduce chlorine loss, but too much will cause "chlorine lock" and stop chlorine sanitising correctly. Pool & Hot Tub water should be kept between 30 - 50. 
 

F.A.Q: Aquacheck Pool & Hot Tub Dip Test Strips

Q: How do I use Aquachek chlorine test strips
A:To use Aquachek chlorine test strips, dip the strip into your pool or spa water for 15 seconds. DO NOT Shake off any excess water and compare the color of the strip to the color chart on the bottle to determine the chlorine and other levels.

Q: How accurate are Aquachek chlorine test strips?
A:Aquachek chlorine test strips are highly accurate and are designed to provide a quick and easy way to test chlorine levels in swimming pool and hot tub spa water. They are a reliable and cost-effective solution for monitoring chlorine levels and are especially good for Intex Pools andHot Tubs?

Q: How often should I test my pool or spa water with Aquachek chlorine test strips?
A: It is recommended to test your pool or hot tub water at least once or twice a week, or more frequently when the swimming pool or hot tub is being used a lot, such as in the main Summer months, or if you notice a change in the water's appearance or smell.

Q: Can Aquachek chlorine test strips be used in saltwater pools?
A: Yes, Aquachek chlorine test strips can be used in both saltwater and chlorine pools.

Q: How do I store Aquachek chlorine test strips?
A: It is important to store Aquachek chlorine test strips in a cool, dry place to ensure accuracy and longevity. Keep the bottle tightly sealed to prevent the strips from drying out or becoming contaminated.

DIP TEST INTRUCTRUCTIONS:
Aquachek Chlorine Test Strip Application Instructions
1. Dip strip into pool or hot tub water and remove immediately.
2. Hold strip level for 15 seconds, but do not shake the excess water from strip.
3. Compare Free Chlorine, pH, Total Alkalinity and Cyanuric Acid results to the colour chart on the back of the bottle.
4. Adjust water levels accordingly using appropriate chemicals.
5. Store at room temperature and remember to ensure the cap is put back on tight.

DELIVERY: We aim to send& Aquacheck dip test strips within 1-2 days. Stock items are normally sent same day, and delivery made between 2-3 days

RETURNS:

Aquacheck Dip Test Strips can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

When we receive the Wooden Pool, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.

DELIVERY: Trutest Test Strips normally take between 1-3 days, but please allow 5 working days in some extreme cases.

 

RETURNS: Trutest Strips can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

 

 

 PRODUCT INFO:

Trutest Test Strips are refil strips to be used with the Trutest Reader.

50 strips in a container These are Pool and Spa Test Strips by Aquachek

 

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

Fi-Clor Alkalinity Increaser. Swimming Pool water needs to be maintained at a Total Alkalinity of between 80 - 140ppm,this figure can easily tested using Aquachek Test Strips.

Keeping your Swimming Pool Total Alkalinity within these limits will prevent damage to your swimming equipment and ensure that the Chlorine in your swimming pool is working effectively, whilst working as a buffer for the pH level

DELIVERY: Salt & Swim Chlorinators are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Hayward Salt & Swim can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

.

When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Salt & Swim by Hayward provides a DIY-friendly salt chlorinator that delivers the 3Cs of salt chlorination - Comfort, Convenience, and Cost Savings which over time will recoup the capital cost. Latest models have chlorine adjustment technology

With this salt system you will get the benefit of silky soft water, that won't turn eyes red. Using salt is a more natural approach to chlorination which also eliminates the harsh chlorine odor associated with factory-produced chlorine.

Less work is required maintain the water treatment levels using a salt system and this convenience means no more lugging heavy buckets of harsh chlorine. With salt chlorination, sanitizing pools happens automatically by converting ordinary salt into 100% pure chlorine.

Salt & Swim 3C also provides a cost savings against more over traditional chlorine. Each cell produces a ton of chlorine, but at more than half the cost of other forms of chlorine.

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

SSC Salt Chlorinator for Swimming Pools up 75 cubic meters. High quality salt system that offers an alternative means to sanitize you swimming pool water. Salt Chlorinators offer a therapeutic system that does not irratate your eyes or dry your skin. Easy to install, two sizes available

Salt Chlorinator for swimming pools upto 75 cubic meters. The Flotide Salt system offers an alternatice to using harsh chemicals. Significantly more pool owners in Australia and USA use Salt systems compared to the UK because of the ease of use and health benefits. Using Salt in a pool with a salt chlorinator the salt passes through the cells of the chlorinator where the electroysis process takes place converting the salt into a chlorine gas. When dissolved in water, this becomes sodium hypochlorite.

Easy to install,the Flotide system will make maintaing your swimming pool more simple while providing clean, safe, crystal clear water

DELIVERY: Aquachek Salt White Test Strips - Delivery will normally take between 1-3 days

RETURNS: Aquachek Salt White Test Strips can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.



When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

Aquachek White Salt Test Strips are essential for Pool owners who have salt generator system. The AquaChek White titrators measure salt (sodium chloride) levels from 400 to 7,000 ppm.

Aquachek White Salt Test strips Tests for:  Salt (as sodium chloride)

These test strips are easy to use, quick and accurate. Perfect for customers who have salt generator systems. The test strips provide an accurate reading in just minutes measuring salt (sodium chloride) levels from 400 to 7,000 ppm.   Using these test strips you can ensure that your salt generator will is producing the correct amount of chlorine to keep water clean and free of contaminants.

Aquachek advise that for a clean and healthy pool, you should test the water at each end a minimum of twice a week. You get 10 in a pack

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The Lovibond PC 12 -in-1 Photometer performs 12 tests on your pool or spa water. The Lovibond PC 12 -in-1 is easy to use and gives accurate water readings. This photometer comes complete with a 1,000 test memory for easy referencing.

The PM 600 and PM 620 photometer range brings pool testing to the next level for discerning pool operators. The ergonomic, portable, waterproof design enables users to select just one unit for accurate analysis of up to 34 parameters anytime and anyplace.

The PM 600 focusses on the main pool para- meters required for balanced water including: Alkalinity, Bromine, Chlorine, Cyanuric Acid, Iron, Calcium Hardness, Copper, Sodium Hypochlorite, Ozone and pH-value. Compatible with the tried and trusted Lovibond® Tablet reagents, it is designed to be robust, reliable yet easy-to-use for any pool operator.

The PM 620 extends these capabilities to include up to 34 parameter variants from Acid Demand to Urea. Its unique design enables compatibility with Lovibond® Tablet, Liquid and Powder reagents, making it one of the most flexible and complete pool photometers available today.

Both units offer a large, back-lit graphic display to aid analysis by providing on-screen method prompts, information regarding test measurement range and reagent type and automatic countdown timers for accurate reaction periods. The internal memory is capable of storing up to 1000 results with date, time and sample ID. These results can be reviewed at any time and can be downloaded to a PC via an additional Infra-Red module (IRiM)*.

Supplied in a durable, portable case complete with accessories and space for additional reagents, both photometers provide immediate access to the accurate water analysis expected of the Lovibond® brand, clearly the best choice for water analysis

 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days.

RETURNS: All products can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

The Lovibond MD200 pool photometers are robust, portable handheld meters designed to be used anywhere from plant room to pool side. With its waterproof (IP68) housing and high precision interference filters and LEDs, the meters produce accurate reliable results for confident pool management. A backlit screen, 4 button keypad, scroll memory function which saves the last used parameter, and one time zero for switching between methods make the unit easy to use and ideal for testing in any environment. Results containing date and time can be stored in the on-board memory, and can also be downloaded via an infra-red unit (IRiM) for later review in excel or notepad. With the added reliability of the Lovibond reagents the MD200 is the ideal choice for photometric pool water testing.

Optics
LEDs, interference filters (IF) and photo sensor in transparent sample chamber. Depending on the version, up to 3 different interference filters are used.

Wavelength specifications of interference filters:
430 nm Δ λ = 5 nm
530 nm Δ λ = 5 nm
560 nm Δ λ = 5 nm
580 nm Δ λ = 5 nm
610 nm Δ λ = 6 nm
660 nm Δ λ = 5 nm

Wavelength Accuracy
± 1 nm

Photometric Accuracy
3% FS (T = 20°C - 25°C)

Photometric Resolution
0.01 mg/l

Power Supply
4 AA batteries, capacity approx. 53 hours or 15000 tests (without backlight)
Auto - OFF
automatic switch-off

Display
backlit LCD (on keypress)

Storage
internal ring memory for 16 data sets

Interfaces
Infrared interface for test data transfer

Additional feature
real time clock and date

Calibration
factory calibration and user calibration. Reset to factory calibration possible

Dimensions
190 x 110 x 55 mm (L x W x H)

Weight
basic unit approx. 455 g

Environmental conditions
Temperature: 5 - 40 °C rel. humidity: 30 -90% (non condensing)

Conformity
CE; tested with standard solutions