Filters

Brand

Chemical

Colour

Media

NetType

Option

Pool

PoolType

Power

Price

Season

Size

size

Style

Syle

TESTING. Style

Type

Weight

Weight

weight

15ft Round Steel Wall Pool - 42" Deep - World of Pools

15ft Round Steel Wall Pool - 42" Deep

by World of Pools.com
£49.00
  • 15ft Round 42 Inches Deep Steel Wall Pool Includes Liner, Filtration & Ladder
  • Ideal Permanent Pool For A Young Family
  • Comes with a Quality Plain Blue Liner
  • Comes with Same Filter & Pump As Doughboy Pools
  • Extra upgrades available  (pool heat pump, maintenance kit, LED lighting, etc.)
  • Extra pipework available
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation - 2 Day Build

DELIVERY: Steel Swimming Pools are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

RETURNS: Steel Swimming Pools can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.


When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

PRODUCT INFO:

15ft Round Steel Walled Swimming Pool with 42" Wall Height Making It Ideal For A Family With A Young Family. Affordable & Fitted With Same Filtration Equipment Included In Our Doughboy Pool Packages

The 15ft Round 42 Inch deep Steel walled pool package is the perfect permanent pool to start off with as the 42" wall depth gives you a 3ft (36") water depth which is more suitable for younger families.

When your young children grow up and can safely stand in deeper pools, then you can simply take this 15ft Round 42" Steel Wall Pool down, sell it on or give it to a friend and install a deeper pool.

  • Boulder Tiled Pattern Overlap Swimming Pool Liner
  • American Manufactured Highest Quality Above Ground Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Replacement Boulder Tiled Pattern Overlap Liners by Swimline are 16 thou on the floor & walls, to ensure a professional installation only install the liner on a warm and dry day as these are stretched into place to prevent creases. These liners are suitable for 48” and 52” wall heights and due to the nature of this product these are non-returnable so please be sure you have measured your pool correctly before placing an order.

The Overlap liner is probably the least expensive liner you can buy on the market but if installed correctly can look as good as any other, please ensure all preparation works are carried out to manufactures guidelines as any imperfections will be shown once you start filling with water. Here are a few liner installation guidelines that we would strongly suggest following 

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. Always form a cove or install your Easy Cove at the bottom of the pool wall. The coving is a vital part in ensuring a lock is formed at the bottom of your pool. An inadequate cove will result in liner pushing underneath the wall causing the liner to fail.

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

When overlapping your liner be careful not to drag it over any sharp edges to puncture the liner and make sure the overlap is even all the way round. Once you have overlapped it so much aim to have the liner 3” to 6” off the ground before filling and clamp down with heavy duty pegs. 

Start filling the pool, at this stage there should be 1 person inside the pool trying to move out any excess liner material to the edges and ensuring they control the helpers outside the pool to release or hold the liner as necessary.

Whilst filling do not be tempted to drop to much liner in at once as creases will not be able to be pulled out due to the weight of the water. Drop liner in small and even quantities until water level has reached pools walls, at this stage you should not have to drop any more liner in.

These replacement overlap swimming pool Liners are suitable for all sizes of the following pools:
Doughboy, Vouge, Teakwood Discovery, Equinox , Regatta & Regatta II, Topaz, Reprieve, Oracle, Trevi 205, Summer Days.

These liners have a material thickness of:
Wall - 16 thou thick Virgin Vinyl and Floor - 16 thou thick Virgin Vinyl
This liner fitting is a 2 to 4 man job - please do not try this with 1 person.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

  • Cube Tiled Pattern Overlap Swimming Pool Liner
  • American Manufactured Highest Quality Above Ground Pool Liners
  • 7 Days A Week Installation Helpline from World of Pools.com
  • Quick & Easy Installation 

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

PRODUCT INFO:

Replacement Cube Tiled Pattern Overlap Liners by Swimline are 16 thou on the floor & walls, to ensure a professional installation only install the liner on a warm and dry day as these are stretched into place to prevent creases. These liners are suitable for 48” and 52” wall heights and due to the nature of this product these are non-returnable so please be sure you have measured your pool correctly before placing an order.

The Overlap liner is probably the least expensive liner you can buy on the market but if installed correctly can look as good as any other, please ensure all preparation works are carried out to manufactures guidelines as any imperfections will be shown once you start filling with water. Here are a few liner installation guidelines that we would strongly suggest following 

Liner Installation Instructions

Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. Always form a cove or install your Easy Cove at the bottom of the pool wall. The coving is a vital part in ensuring a lock is formed at the bottom of your pool. An inadequate cove will result in liner pushing underneath the wall causing the liner to fail.

Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

When overlapping your liner be careful not to drag it over any sharp edges to puncture the liner and make sure the overlap is even all the way round. Once you have overlapped it so much aim to have the liner 3” to 6” off the ground before filling and clamp down with heavy duty pegs. 

Start filling the pool, at this stage there should be 1 person inside the pool trying to move out any excess liner material to the edges and ensuring they control the helpers outside the pool to release or hold the liner as necessary.

Whilst filling do not be tempted to drop to much liner in at once as creases will not be able to be pulled out due to the weight of the water. Drop liner in small and even quantities until water level has reached pools walls, at this stage you should not have to drop any more liner in.

These replacement overlap swimming pool Liners are suitable for all sizes of the following pools:
Doughboy, Vouge, Teakwood Discovery, Equinox , Regatta & Regatta II, Topaz, Reprieve, Oracle, Trevi 205, Summer Days.

These liners have a material thickness of:
Wall - 16 thou thick Virgin Vinyl and Floor - 16 thou thick Virgin Vinyl
This liner fitting is a 2 to 4 man job - please do not try this with 1 person.

Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

Doughboy 15ft Regent Swimming Pool - World of Pools
  • Doughboy Regent 15ft Round Swimming Pool Package
  • Package Includes A Frame or Deck Ladder and Sand Filter & Pool Pump
  • Super Kit Upgrade Include Solar Cover, Maintenance Kit and Chemical Kit
  • Quick & Easy To Build - 2-3 days
  • Extensive Warranty Backed By Long Standing Company
  • Our Installation Helpline Manned 7 Days A Week

DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

PRODUCT INFO:

15ft Doughboy Regent Pools are the Stand Out Resin & Steel Pool in the UK market. If you want the best then buy a 15ft Doughboy Regent Pool. Increase the pool depth to 7ft, it's easy with a Doughboy Expandable liner upgrade. Pool Special Offers on 15ft Doughboy Regent Swimming Pools with Heat Pump Packages

15ft Regent Doughboy Pools are renowned for their attractive 6 inch resin toprails. Doughboy Regent Pools are best suited to above ground pool builds, as the curvy, classy lines are meant to be seen not sunk. If pretty does it for you then the Regent is definitely your sort of swimming pool. If you are going to sink the pool, buy the cheaper Premier.

What Doughboy Pool Should I Buy From H2oFun?

All Doughboy Pools are built to such high standards that any of the ranges you buy will last fr years. Benefits include

    Quick & Easy To Build

    Expandable Depths- You Can Have Your Pool Up To 7 feet Deep

    Best Value Pool Packages In The UK Swimming Pool Market

    Extensive Warranty Backed By Long Standing Company

    Huge Range To Suit All Budgets

Our Installation Helpline Manned 7 Days A Week

One Other Reason To Buy A 15ft Doughboy Regent Swimming Pool Is That You Can Sink Your Above Ground Doughboy Pool In The Ground Without Affecting The Warranty.

We Will Even Supply A Step-By-Step Guide To Ensure That You Achieve The Best Result Possible.

Doughboy 15ft Regent Swimming Pool Kit includes:

STANDARD KIT includes:

  • Structure
  • Liner
  • Deluxe Pump & Sand Filter
  • Skimmer & Return
  • Ladder A-Frame  

SUPER Doughboy Pool KIT includes:

  • Structure
  • Liner
  • Deluxe Pump & Sand Filter
  • Skimmer & Return
  • adder A-Frame
  • Solar Cover
  • Manual
  • Cleaning Maintenance Kit
  • Chemical Starter Kit

    Call 01322 554 870 for the best advice on your 15ft Doughboy Regent swimming Pool

    Doughboy Liner Plain Blue 20 thou - World of Pools

    Doughboy Liner Plain Blue 20 thou

    by Doughboy
    £395.00
    • Doughboy Plain Blue Liner
    • Replacement Liner For Doughboy Pools 
    • 20 Thou Thickness
    • 48-52" Deep Pools, Standard Doughboy Size
    • Replacement Genuine Overlap Liner from Doughboy

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product can be returned in original packaging, suitable for resale, within 14 days from date of delivery.

    PRODUCT INFO:

    Replacement Doughboy Liners for both the Regent and Premier. High quality liners with unbeatable warranty on the seam. In stock for quick delivery

    Doughboy Replacement Liners are all plain blue overlapping liners which are stretched into place, this can be a difficult task to do so please follow the instructions below.

     

    1. Check and Double Check: It’s is vital to check that all levels and measurements are correct before positioning your Doughboy Liner. The cove is a vital structural element that prevents water pressure from forcing the liner out under the bottom rail. So please be sure that cove is installed correctly by manufactures guidelines.
    2. Seam Positioning: Check the pool floor (area inside the walls) for levelness. Fill in all depressions and remove any stones or sharp object from floor. Place the Doughboy liner on the top of top rail, the liner should have overhanging the outside wall by 12” inches. Hold end and unroll liner down middle of pool as you would carpet, do not place liner seam over skimmer or return fitting openings.
    3. Install Liner: Work in both directions from the point where is already overhanging, unfold Doughboy liner, drape over the top rail and down the sides approximately 24” inches. The liner should be barely above the pool floor in the centre only. Remember that the centre seam or centre of the Doughboy Plain Blue liner should be inside the pool about 12” inches below the top rail. Correct any bunching or pleating conditions in the liner wall. Inspect the liner for open seams if any found return to dealer for prompt replacement of liner.
    4. Fill Pool: With the Doughboy Plain Blue liner in position, hold in place by attaching heavy duty clips over folded cardboard on the underside of each top rail. Carefully cover the end of the garden hose with a sock and tape securely, once this is done place hose inside the pool and start filling. As pool fills the liner will stretch as the water begins to cover the bottom. At this point check the walls for EXTREME tautness, release clips if need be but be sure not to release too much slack as this will cause creases. When releasing the clips you will also need to keep in mind the clips will need to be loosened evenly for whole circumference of the pool (Doughboy advise very little amounts at a time). Once the water reaches past the cove the tension should ease off dramatically and you should have no wrinkles on the floor. Creases in the wall can be removed by re-tauting the Doughboy Plain Blue liner over the wall,
    5. Procedure to attached liner: With the help of two or three people, raise and hold the Doughboy Plain Blue liner up from any three top rail sections. Remove some of the top rail completely and stretch the Doughboy liner over metal wall as tight as possible, then re-erect the top rail with the liner in position and repeat the procedure all the way round the pool (Remembering only taking 2-3 sections off at one time) Once this is completed and the water is at correct level then the water can be turned off and cuts to the liner can be made.
    • Plain Blue Overlap Swimming Pool Liner
    • American Manufactured Highest Quality Above Ground Pool Liners
    • 7 Days A Week Installation Helpline from World of Pools.com
    • Quick & Easy Installation 

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

    PRODUCT INFO:

    Replacement Plain Blue Overlap Liners by Swimline are 16 thou on the floor & walls, to ensure a professional installation only install the liner on a warm and dry day as these are stretched into place to prevent creases. These liners are suitable for 48” and 52” wall heights and due to the nature of this product these are non-returnable so please be sure you have measured your pool correctly before placing an order.

    The Overlap liner is probably the least expensive liner you can buy on the market but if installed correctly can look as good as any other, please ensure all preparation works are carried out to manufactures guidelines as any imperfections will be shown once you start filling with water. Here are a few liner installation guidelines that we would strongly suggest following 

    Liner Installation Instructions

    Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

    Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

    Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. Always form a cove or install your Easy Cove at the bottom of the pool wall. The coving is a vital part in ensuring a lock is formed at the bottom of your pool. An inadequate cove will result in liner pushing underneath the wall causing the liner to fail.

    Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

    When overlapping your liner be careful not to drag it over any sharp edges to puncture the liner and make sure the overlap is even all the way round. Once you have overlapped it so much aim to have the liner 3” to 6” off the ground before filling and clamp down with heavy duty pegs. 

    Start filling the pool, at this stage there should be 1 person inside the pool trying to move out any excess liner material to the edges and ensuring they control the helpers outside the pool to release or hold the liner as necessary.

    Whilst filling do not be tempted to drop to much liner in at once as creases will not be able to be pulled out due to the weight of the water. Drop liner in small and even quantities until water level has reached pools walls, at this stage you should not have to drop any more liner in.

    These replacement overlap swimming pool Liners are suitable for all sizes of the following pools:
    Doughboy, Vouge, Teakwood Discovery, Equinox , Regatta & Regatta II, Topaz, Reprieve, Oracle, Trevi 205, Summer Days.

    These liners have a material thickness of:
    Wall - 16 thou thick Virgin Vinyl and Floor - 16 thou thick Virgin Vinyl
    This liner fitting is a 2 to 4 man job - please do not try this with 1 person.

    Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

    DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.

    Premium Above Ground Pool Blue Solar Cover 200 micron - World of Pools
    • Heavier than Bestway & Intex Solar Covers
    • Heats your pool for free
    • Keeps debris out of the pool
    • Retains heat at night
    • Reduces chemical usage

    DELIVERY: 200 micron solar covers are sent out via a specialist carrier. Delivery will normally take between 1-3 days, but please allow 5 working days in some extreme cases.

    RETURNS: 200 micron solar covers can be returned to us, in compliance with the Consumer Contracts Regulations, unused and in their original packaging, suitable for resale, within 14 days from date of delivery. Returns should always be sent via "Signed For" carrier or postal service.

    Our returns address is Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870

    When a return is received back into our warehouse our returns department confirm that everything is present and that the item is in its original condition, to make sure it is eligible for a refund. We will process the refund normally on the same day we take them in, but please allow up to a maximum of 14 working days for the money to reach your bank or credit card. It is unlikely to take this long but due to reasons such as bank delays or errors, this may occasionally occur.

    PRODUCT INFO:

    200 Micron Above Ground Pool Solar Covers are over twice as thick as Intex or Bestway Solar Covers. Higher quality and better heat retention mean that these 200micron solar Covers will heat your pool quicker and keep the heat in longer. Ideal Solar Covers for Above Ground Pools.

    All of our 200mic Above Ground Pool Solar Covers are made from Heavy Duty Blue Polyethylene that is UV stabilised to ensure a long life for your above ground pool solar cover.

    Every swimming pool should have some kind of floating insulating cover, whether a bubble solar cover or solar sun rings to help add and retain heat in the pool water. If you have an above ground pool finding a high-quality bubble solar cover can be very expensive but World Of Pools can offer a top quality 200 micron solar cover at similar prices to the much lower quality Intex Solar Covers.

    Better quality solar covers will also reduce water loss and less water evaporation means lower water bills and a reduction in chemical consumption

    When using a 200 micron solar cover you should have the cover on the pool so the bubbles are facing down. To maximise performance always keep the cover on the pool when not in use.

    Plain Blue Overlap Liner For 36" High Above Ground Swimming Pools - World of Pools
    • Plain Blue Overlap Swimming Pool Liner 36" High Pools
    • American Manufactured Highest Quality Above Ground Pool Liners
    • 7 Days A Week Installation Helpline from World of Pools.com
    • Quick & Easy Installation 

    DELIVERY: We aim to send all products out on a next working day service but all standard deliveries will be within 5 working days

    RETURNS: This product is produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturers defect

    PRODUCT INFO:

    Replacement Plain Blue Overlap Liners by Swimline are 16 thou on the floor & walls, to ensure a professional installation only install the liner on a warm and dry day as these are stretched into place to prevent creases. These liners are suitable for 36” wall heights and due to the nature of this product these are non-returnable so please be sure you have measured your pool correctly before placing an order.

    The Overlap liner is probably the least expensive liner you can buy on the market but if installed correctly can look as good as any other, please ensure all preparation works are carried out to manufactures guidelines as any imperfections will be shown once you start filling with water. Here are a few liner installation guidelines that we would strongly suggest following 

    Liner Installation Instructions

    Install day must be a warm sunny day to replace your liner with very little wind, the hotter it is the easier the installation will be.

    Leave your new liner in a conservatory or in a very warm spot to get the boxed liner as warm as possible before unpacking. This will ensure flexibility in the liner when it comes to install day

    Prepare your pool Base very carefully, sweeping the pool floor to remove all loose debris and sharp object which may push through. Always form a cove or install your Easy Cove at the bottom of the pool wall. The coving is a vital part in ensuring a lock is formed at the bottom of your pool. An inadequate cove will result in liner pushing underneath the wall causing the liner to fail.

    Install your pool floor felt and foam walls if you have chosen that optional extra, the floor felt will protect your liner from abrasive damage from the floor of your pool, and give a soft feel underfoot. It will also soften any sudden impact with the pool floor.

    When overlapping your liner be careful not to drag it over any sharp edges to puncture the liner and make sure the overlap is even all the way round. Once you have overlapped it so much aim to have the liner 3” to 6” off the ground before filling and clamp down with heavy duty pegs. 

    Start filling the pool, at this stage there should be 1 person inside the pool trying to move out any excess liner material to the edges and ensuring they control the helpers outside the pool to release or hold the liner as necessary.

    Whilst filling do not be tempted to drop to much liner in at once as creases will not be able to be pulled out due to the weight of the water. Drop liner in small and even quantities until water level has reached pools walls, at this stage you should not have to drop any more liner in.

    These replacement overlap swimming pool Liners are suitable for all sizes of the following pools:
    Splasher

    These liners have a material thickness of:
    Wall - 16 thou thick Virgin Vinyl and Floor - 16 thou thick Virgin Vinyl
    This liner fitting is a 2 to 4 man job - please do not try this with 1 person.

    Please note that all warranty claims on liners are only valid if any fault is found on a manufactured seam. All the liners are reverse inflated when manufactured to ensure water tightness, so no warranty can be accepted for holed liners.

    DO NOT USE ANY KNIVES WHEN OPENING THE LINER PACKAGING.